What we can do ? different country different requirement all we can offer.

JXM transparent anti theft city net box

Ⅰ.Overview

JXM non-metallic transparent metering box is a terminal metering device integrating micro switch and watt hour meter. It is made of SMC unsaturated polyester glass reinforced fiber molding. It is suitable for all kinds of civil residence, high-rise building, hotel building, shopping mall, courtyard, villa and other architectural occasions.

II. Model and description

XM - non metallic metering tank

J - enterprise code

Ⅲ.Performance description

JXM non-metallic transparent metering box imported raw materials and UV protection, non-metallic flame retardant, anti-aging, corrosion resistance, strong external resistance, resistance; Injection molding of polycarbonate engineering plastics with medium impact and high transparency; The base material of the box body is made of non metallic flame retardant, anti ultraviolet, anti-aging, corrosion resistant and strong external insulation materials, which is in line with the GBI7466-1998 regulations.

The appearance is flat and smooth, without cracks, obvious bubbles, good transparency, and the surface is free of poor curing, pinhole penetration, soaking, cracks and obvious bubbles; The components in the box have compact structure, reasonable layout, smooth and clear line direction. The wiring of each component in the box can be clearly observed from different directions and faults can be found in time. The base has an integrated wiring slot to standardize and facilitate wiring;

The meter box is tightly buckled as a whole. The multi meter box (4 meters and above) is buckled by the combination of metal anti rust ammonium chain and sliding buckle, which can be opened 180 ° to facilitate maintenance. The triple interlocking protection of anti-theft bolt, lead seal and padlock can be adopted between the upper cover and the base of the product, and the three are in the closed space, which is effectively waterproof, antirust, anti-aging and anti-theft;

The box cover is made of transparent polycarbonate "PC" material for injection molding, and the box bottom is made of ABS engineering plastic for injection molding. The thickness of multi epitope box is ≥ 3omm, and the dimensional deviation of each component is no more than ± 1mm. The performance meets the requirements of technical standards such as hg2503-93 issued by the national chemical industry.

Ⅳ.Specification